Car Accessories > Breakdown Assistance > Product: 128023958
No image found

Arteck 800A Peak Portable Car Jump Starter (Up to 6.0L Gas or 4.0L Diesel Engine) QDSP Auto 12V Battery Pack Booster and QC3.0 External Battery Charger for Automotive, Motorcycle, Boat, Smart Phone

Product Description

Car Jump Starter: Jump your car up to 20 times when away from electrical mains (support up to 6.5L Gasoline or 5.0L Diesel) with built-in heavy duty clamps and cables and 800 amp peak current.

External Battery Charger: Charge phones, tablets or other device and speed of up to 5V/3A, 9V/2A, 12V/1.5A via the Quick Charge 3.0 USB.

Safety Protection: Premium cells, circuitry and safety features protect you and your device from surge or short circuits. Recharges in just 4 hours using the included charging cable.

LED Light: Ultra-bright LED flash light, strobe light, and SOS signal light that lasts 120 hours.

What You Get: Arteck Multi-Functional Car Jump Starter external Battery, jumper clamps, USB charging cable, user manual, our fan-favorite 2 years warranty and friendly customer service.

›See more product details

Imported from UK

Easy to Use Car Jump Starter
If your car won't start don't call a tow truck service or wait on the side of the road for help. Use the Arteck with the
jumper cables to start your car battery in a matter of seconds. Jump your vehicle up to 20 times on a single charge,
with heavy duty cables and clamp built in.

Portable Battery Charger on the Go
The Arteck great travel companion that you can take with you on the go to charge all of your portable electronic
devices, such as smart phones, tablets, cameras, GPS unit, MP3 players, wireless headphones, and portable gaming
systems, etc.

Portable LED Flash Light for the Outdoors
The ultra-bright LED flash light has 3 illumination modes, a flash light when you're in the dark, a strobe light to
attract attention, and most importantly an SOS signal flash that will last up to 120 hours on a full charge for when
you're outdoors and in need of emergency help.

How To Use the Arteck To Jump Start A Vehicle Battery
1. Make sure the battery capacity of the device is above 50%.
2. Plug the jumper cables into the barrel socket of the device and connect the jumper cable clamps to the drained
battery of the vehicle.
WARNING: Always connect the BLACK clamp to the negative ( - ) terminal of the car battery first, then connect the RED
clamp to the positive ( + ) terminal of the car battery. Do not touch the RED and BLACK cable clamps together or connect
both cable clamps to the same piece of metal.
3. Now attempt to crank start the engine.
WARNING: If the engine does not start immediately on the first try, disconnect the jumper cables from the car battery
and wait at least 10 seconds before reconnecting the jumper cables to the car battery.
4. Once the engine has successfully started, disconnect the jumper cable clamps immediately.
PLEASE KEEP AWAY FROM CHILDREN AT ALL TIMES!

Shop the largest choice of Breakdown Assistance online in the UAE. Browse thousands of great deals on arteck products with fast, free delivery.