Rhino RackCap/Topper/Canopy Complete Roof Rack Kit with Quick Release Legs, Bars, Some Kits Included 65" Tracks

Liked the looks, quality and price. Hauled a large bed frame head/footboard that wouldn’t fit in the truck bed From AZ to WA (1700 miles) without any issues. Plus was rear ended in OR destroying our camp trailer and it all held tight. Drove many miles with high winds and rain no leaks detected inside camper shell. I would say it is extremely sturdy.It’s a little noisy but not excessive and that can be reduced by removing the cross bars when not in use. Removing them is the only major drawback, the squeeze mechanism to release each side of the bar is extremely stiff making it a real struggle to do. Plus lots of plastic parts in the release/ looking mechanism so don’t want to use a lot of force to remove.Lots of thought and engineering went into producing them and lots of thought went into installing them, had a mechanically minded friends help. Read all the directions, check for all the parts some are tucked inside the cross bar tubes. We pre-assembled the whole unit then carefully placed it on top of the camper and adjusted it from there. We were careful to hit the single wall outer edge of the camper as there was a double walled center section for structural integrity of the shell. The supplied bolts wouldn’t have been long enough and not sure of any compression issues associated with the double wall. All done before we drilled a single hole.Installed on a Leer fiberglass camper shellNo regrets on purchasing, good price sturdy high quality rack.

This "kit" came as 2 different items, with 3 different sets of directions. This makes It virtually impossible to notice that you are missing hardware and tools. Once you get the main frame drilled on to your truck and go to install the mounts for the cross bars, this is when you will realize that you are missing a critical tool.After spending an hour machining and manufacturing your own tool to just press forward, you will get to the point that you are mounting the crossbars and find out that you are missing specialized hardware.I contacted the seller, and while they are incredibly apologetic for it, after weeks, it is apparent that they are unable to do anything to solve this problem.Their first solution was For me to return the product. That is absolutely not an option, as I had to drill holes into my truck topper that the frame is now Covering and filling.Their 2nd solution was to offer me a partial refund for me to go buy hardware that would work to put it together. That is also not an option, as it is specialized hardware, and installation of anything else will Void the warranty of the product.So, here I sit, weeks later with a frame drilled and installed on my truck topper, crossbar mounts that can install, and no way to install the crossbar. .This cost me the ability to take critical needed gear on a hunting trip that I had planned for months.Thanks for ruining my hunt With your incompetence.

Cutting up and attaching the tracks was is as far as I could get. My package was missing the bag for the mounting kit(QMHD05) for the crossbars. I'm waiting to hear back from the manufacturer and seller to see how I can get the missing parts.Other than that, I was able to chop the tracks easily with a miter saw.The T bolts slide along the track on the bottom, so you can drill holes on your mounting surface spaced as needed. The only line up that is needed is the end cap portion and even that is not required. This makes drilling far more flexible. In my case, I could drill around the cross brace on the underside of my tonneau cover and not have to worry about getting access to the bolt.The parts that I do have fit together well. It's a well designed kit. The longest part of the install was marking for drilling. They list a 6.5 mm drill bit to be used. I used a 1/4 and that worked out perfectly.I'm looking forward to mounting the cross bars and getting the bikes up there. Hopefully, the customer support is excellent.Update: Excellent service directly from Rhino Rack. Seller support is non existent. Good to know that Rhino Rack is ready to stand by it's products.Update: Thanks to Rhino Rack USA quickly sending me the kits, I was able to complete my install. The rack is on solidly. If you line up the towers perfectly into the bases, there's a tiny bit of play. To take the play out, offset the towers in or out of the cross bars just a hair, That'll just a hair. That'll take out that little bit of wiggle.

When I started looking on Amazon for a rack to put on the topper of my Silverado I was quickly overwhelmed. After some research I went with this one and I'm glad I did. I am extremely satisfied with it! It is extremely well built and functional. Installation was pretty simple. The 54" crossbars hang over just right from side to side and the tracks went all the way from front to back on the topper. I did not need to cut them. I probably could have so it fit better but I left them long so I had as much real estate as possible. My truck is a 2009 Silverado 1500 with the 5.7" box and my topper is made by Century.

I love the rack , I got the HD channel with canopy track. Take sometime to install. You will need to look for the center of the canopy roof to square the tracks . Roof is wider on the back than on the front of the canopy, at least on the F-150 Are canopy I got. Took me around 1hr to install everything not bad .

Had to trim to fit but the end caps go right back on after cutting. Worked for my 2016 GMC Canyon long bed topper.

Product was exactly as described and price was very fair. Rhino requires one less piece when attaching to roof rails so this lowered the overall price even more (integrated leg and foot). Highly recommended.

Opened box, nowhere near enough parts to even resemble a roof rack!

These are very good roof racks for carrying ladders or your fishing boat. Very happy with them.

Absolute favorite roof rack I ever had