Kicker 46KISLOC2 K-Series Stereo Line-Output Converter w/Remote Turn-On Output

Q: has anyone gotten the 12v remote wire to work, please explain how, to many reviews say it doesn't?

I just install this and it work. i tap my rear speaker then added the ground and the remote goes into the amp to turn the amp on. 2014 Camry stock headunit.

Q: Does the blue remote wire go to the amp itself, or do you have to connect it to a 12v source like a cigarette lighter ??

It is meant as a remote turn on wire (connect to amp), the LOC uses speaker wires to turn on/off and for voltage from head unit. Here is what is very important; some newer vehicles send continous voltage through speaker wires which will keep this unit on all the time. If you hook it up like described above do the standard quick test, turn on car, run, etc. Then turn off, if LOC/ Amps stay on for more than like a minute, then use the blue wire to hook up to cig lighter and test again. Hope that helps

Q: Does anyone know if i use some rca y connector, can i run 2 amps off of 1 of these? or do i need two of them to run 2 amps?

You shouldn’t need two. This connects to you left and right rear speaker, sends a power signal to the amp to turn on via remote wire. You might have to splice the remote wire coming back so it turns both amps on. I think the y connector should work fine though. I’m an electrician though, not a car audio installer. Lol. Good luck!

Q: Does the amp has to have DC offset? or does this just connects directly to amp and it will turn amp off when car is off?

There are 6 wires on the KISLOC2 - 2x wires for tapping into L speaker, 2x wires for tapping into R speaker, 1 wire for GND and 1 wire for remote turn-on (running from LOC to amplifier). RCA outs from the KISLOC2 go to the amp input. It actually does turn the amp on and off with the car/power to the head unit! As long as you ground it properly, it turns off/on with the signal from the head unit.

Product ID: 334690120

Secure Transaction

Details

Brand
KICKER
Maximum Supply Voltage
16 Volts
Minimum Supply Voltage
16 Volts
Mounting Type
No Mount
Number of Pins
4

⚡100mA remote turn-on output

🔊Up to 55W input signal

🎚️Flat 20Hz-20kHz frequency response

Description

🎧 Elevate your sound game—turn any ride into a concert hall!

PURE SONIC ACCURACY - Experience crystal-clear highs and thunderous lows with a flat frequency response at all volumes.
COMPACT LIGHTWEIGHT - Sleek design (15.2 x 12.7 cm, 90.7g) fits anywhere without bulk or fuss.
POWERFUL REMOTE TURN ON - 100mA, 12V remote wire powers multiple amps without hunting for switched power sources.
UNIVERSAL COMPATIBILITY - Works seamlessly with standard and most smart radios for effortless integration.
PLUG PLAY AMPLIFIER UPGRADE - Add an amp to any factory radio using just speaker wires—no complex installs needed.

The Kicker 46KISLOC2 K-Series Stereo Line-Output Converter transforms factory speaker signals into high-quality RCA outputs with a flat 20Hz-20kHz frequency response. It supports up to 55 watts input and features a powerful 100mA, 12V remote turn-on output, enabling easy amplifier integration without additional power wiring. Compact and compatible with most radios, it delivers pristine audio clarity and effortless installation.

Specifications

Brand	KICKER
Maximum Supply Voltage	16 Volts
Minimum Supply Voltage	16 Volts
Mounting Type	No Mount
Number of Pins	4
Interface Type	RCA
Number of Channels	2
Product Dimensions	15.2L x 12.7W Centimeters
UPC	713034001423
Manufacturer	Kicker
Global Trade Identification Number	00713034001423
Country of Origin	USA
Model number	46KISLOC2
Number of Memory Sticks	1
Item Weight	90.7 g
Item model number	46KISLOC2
Connectivity Technology	RCA
Are batteries included?	No