JeCar Rear Door Foldable Table Cargo Shelf Storage Tailgate Table for 2007-2018 Jeep Wrangler JK JKU, Black

This was an awesome investment. Took a little time to install however in the end it worked out and has been perfect

This little table is awesome and a good place to make a sandwich on the trail or use as a beer holder! As long as you snug the cable bolts up, it doesn't rattle or make any noise. There were no directions with mine but I was able to look at the product pics on amazon to figure it out. It does come with the hole template. You will need to get a 25/64" drill bit and a rivnut gun w/ a M6 mandrel if you're going to use the nutserts and machine screws.

This is by far the worst purchase I have ever made for my Jeep. It must be some scrap that TeraFlex sold off to a third party. No where does the add mention that this is a TeraFlex product. But the template clearly says Teraflex. There were no instructions, I usually just use those for reference, but would be nice to have them. First it calls out a 25/64 drill bit. WRONG! It is actually an 11/32 drill bit. Luckily I only drilled one hole. Then I went to set the threaded inserts. There was no tool or anyway of installing these. Made a trip to the hardware store and purchased a couple 6mm bolts, nuts, and washers. Next after dealing with that, I went to assemble the tray. The template was wrong or the tray was to short. I had to re-drill the holes in the mounting bracket to get the correct distance between the two brackets. Get the cables and latches installed, only to see that the stop blocks are to long. If I hadn't drilled the holes in my tailgate already I would have sent this back. JUNK!!!

De muy buena calidad, el tamaño es perfecto

The quality of this table is great. Powder coated aluminum that is light weight. The drilling into the tailgate part of this was not so fun. The template says drill 25/64 holes but you need to actually drill 23/64 bit holes. DONT overlook that crucial piece of advice. Otherwise it’s well worth the addition.