NYXCL Miroku 80Pcs Mixup 2 inch roll Lock Quick Change Discs Set, A/O Sanding Discs with 1/4" Holder, for Die Grinder Surface Prep Strip Grind Polish Finish Burr Rust Paint Removal

These things are as wavey as a potato chip and instantly shred to pieces upon use. They are simply unusable and should not be offered on Amazon. I Have been doing this for years and have never seen such poor quality discs. They are dangerous to use as the catch sharp edges because they are so thin and warped.

Metal workers who need a quick removal of burrs, surface rust, blending and shaping of welded work know the advantages of a small diameter sanding discs mounted on a small right angle air grinder. Easy working in places and easy grab and go conveyance I have many air grinders all set up with different rotary cutting tools. No worker should be without carbide burrs, flap discs. Zipper cutting discs and surface conditioning pads. The quick change sand discs allow me fast blending, and finer polishing in of details. I use 1” 2” and 3” the 2” sanding discs are used the most. I often use 3” discs on my 2” or 1” arbor, it allows more flex on the disc, a 1” arbor works great to bounce between working tight spots and larger areas. Obviously I have bigger and heavier grinders for ripping down big areas too. But my favorite grab and go is my 2” discs and my cut off wheels. I find sanding discs a great value in my labor saving arsenal of grab tools

Nice assortment, but the disks were crammed into little ziplock baggies and were (mostly) all warped and wobbly. It didn’t matter how hard I would tighten them down to the backer, they’d still be very uneven, so only a small amount of the actual disk makes contact and that part of it wears out quickly, rendering the whole thing relatively useless after that (they generally disintegrate after that). I don’t know if they were manufactured that way, or if a result of how they were packaged, but I go through about ten of these disks in the same amount of time/surface that I would normally only use one. I wouldn’t buy these again.

I don’t understand why anybody else would not give this full stars. The vendors sent this out right away and I was impressed by the fast delivery of the affordability, and the great quality sanding discs. I am beyond happy with my purchase and have just purchased more. I highly recommend the vendor and this item! . I am using this with my right angle grinder 12V Milwaukee! I am so happy with this purchase

I opted to go for this low cost route than the high dollar 3M pads, due to the verity of grits and the hex adapter. The majority of the pads are badly wavy but the few I have used, you can massage them acceptably straight will a little effort. I was able to descale the rust of all four brake calipers and still have plenty of life with one single pad. The hex adapter is a bonus but its doesn't spin perfectly centered about the hex shaft, (get what you pay for) but for an emergency situation, it will be good to have the ability to use a drill.For the typical hobbyist, this kit is a pretty good value, if you have the patience to work each pad straight before use. If I was using these for more precision or paying jobs, I would probably just stay with the more expensive 3M for the quality control.

Throw away your wire cup grinders for metal paint preparation and cleaning. This high speed sanding disk system securely attaches sanding disc to the included rubber disc with a simple twist mechanism. The shaft on the included rubber pad fits securely into the Collett of your die grinder. Using 60 grit sanding disks I guarantee you you will cut your preparation time in half for your wrought iron fence paint preparation work and produce an outcome that will astonish you. Using a new state of the art urethane reinforced alkaloid commercial paint with extremely heavy body produced a finish resembling a powder coat on 20 year old fence

I like that I don’t get a bunch of useless higher grits, but the lack of any padding meads they don’t conform to a rounded surface very well.

I would have given them five stars if they were all marked with the grit as shown.They probably aren't quite as durable as "The Brand", but I've used them on a couple projects now and they are a far better value.Having used them considerably more, I agree with myself. I might even give them 5 stars if I'd simply labeled the bags when I got them!

These little Sanders are good quality and last a good while. Plenty of them in this package and a good selection of sanding grades.

La qualité pour la plupart des disques sont correct, mais certains disques sont défectueuse, autrement dit les disques tombent et s'arrachent à chaque première utilisation. Mais, ne vous inquiétez pas, leur service à la clientèle est excellent, ils ont une attitude très positif, très poli et ils vont résoudre le problème très rapidement. Je ne dirai pas que tous ces disques ont des problèmes, peut-être c'est juste moi qui est tombé sur un mauvais sac. J'ai quand même réussi à finir mon projet, alors ces disques étaient quand même pas si pire rendu à la fin. En sommes, je suis quand même content de l'avoir acheter et de l'avoir utiliser même si certains étaient défectueuse, mais ils ont un excellent service, alors 4/5.

I plan on returning these. I tried a couple up[on receiving them, and about half of the discs, in various grits are curled and distorted. They won't cinch up flat when spun onto the base and leave a lousy finish. I'm pretty disappointed with them, should have spent the extra on the big 3 brand.

Doesn't come with both Chuck styles as is shown in the picture. Disc's are o.k quality. Overall not bad for the money but I was expecting both drive styles so I could use it in my electric impact driver.

These sanding disks work well, they came in a big bag with the proper holder/attachment. They seem to be of good quality and long-lasting and very affordable which is nice! I ended up buying about 150 of these in different grits. To test them I polished up an old cast iron intake off a Mopar 383 engine and polished it and they do work great!