🔍 Find your studs, find your edge—never miss a mark again!
The Franklin Sensors ProSensor M70 is a professional-grade stud finder featuring 7 sensors for superior accuracy and a maximum detection depth of 1.5 inches. Its LED display simultaneously highlights stud centers and edges, enabling precise wall scanning without calibration. Designed for durability and ease of use, it operates on AAA batteries and is highly rated by both consumers and professionals.
| Product Dimensions | 11.68 x 6.73 x 5.08 cm; 140.61 g |
| Part number | FSM7002HD |
| Material type | Plastic |
| Power source type | Battery Powered |
| Manufacturer | Franklin Sensors |
| Item model number | 317740628 |
| ASIN | B0B1GVTLN2 |
O**R
Perfect
Accuracy seems spot on, found the studs with no problems. Seems to not give any false readings as far as I can tell. Works great. And such a reasonable price Can't go wrong!
C**A
Very good buy
Have had a stud detector for many years, a useful tool but accuracy could never be relied upon, a complaint often seen applied to other stud detectors. However the performance of this unit appears to be at a different level. Have only used it for detecting ceiling joists through dry wall plaster boards, but its sensitivity appears excellent, and its design incorporating a line of sensors makes centering of the joist easy. Usually the centre is positively identified by the green led, but even in more difficult situations, the behaviour pattern of red leds is sufficient to provide an accurate assessment. Overall, especially considering its modest price, an impressive tool, and a very good buy.
M**N
Good joist finder .... With a catch
Just take care as the same lights appear when travelling over pipes and electrics as over joists. So good to detect of SOMETHING is behind the wall .... A bit of common sense needing to be applied to figure out what it might be though!
M**D
The only stud sensor I have found that works
Absolutely spot on. Had many a stud detectors in the past and all were hit and miss. Needed to put a TV up on a stud wall and after reading loads of reviews, I chose this as it was the only one that appeared to work.And it does, VERY well. The LEDs show the width of the stud and the middle LED goes green to highlight the centre. I had narrow studs in the wall so had to make sure I hit the centre exactly and this was perfect for the job.
M**3
Great piece of kit
Works as it should, very precise
P**9
Good
Worked better than expected for the price.
N**R
It works!
This actually works rather well, unlike most you can buy. You still need to figure out what the results mean but, when the centre red led turns green, you really are over the centre of the stud. Only detects studs, so a pipe/cable detector is still useful but these work ok on most others,
A**O
Stud finder
Having tried other alternativas, I thought this did was the most accurate. 5 stars
Trustpilot
1 week ago
1 month ago
