Ceedmon 20 Pieces Clip-on Ferrite Ring Core RFI EMI Noise Suppressor Cable Clip for 3mm/5mm/7mm/9mm/13mm Diameter Cable, Black

I am using these for ham radio transmitter applications. I use digital modes a lot, i.e. FT8. Occasionally I will have an issue where I key up the transmitter and the program goes nuts. Loses its connection to the radio and D to A / A to D converter (Signalink). I suspected the USB connection to the computer was being scrambled. I had bought the Signalink cables for between their TNC and the radio, which contain built-in toroids for RF suppression. But used a plain old USB2 cable I had lying around to save a few bucks. Well, apparently cheaping out burned me. I installed the RF chokes listed here, one on each end of the USB cable (choose an appropriate diameter), and the problems have stopped. I am impressed with the quantity and number of diameters that are include, and that the snaps to close the toroid are openable - so you can reuse these on other devices. Decent quality.

One can never have too many ferrite ring cores. There's always some device that is suffering from RFI and these work well to limit it.

My office is located next to a Dermatology office and I share a wall with them. We had moved in recently and I noticed that during certain times of the day my computer monitors and speakers would go crazy - feedback, weird patterns on one monitor, one monitor shutting off intermittently, speakers making loud hum with a repetitive pattern. At first, I thought my desktop was dying. Then I noticed it would only happen for about 45 minutes and everything would go back to normal. Then my coworker in another office - his wireless mouse would die with my computer would go on the fritz. I figured it had to me interference from a machine or equipment and did some research online regarding radiofrequency interference - causes, symptoms, and ways to cure. One day as my computer shut off a monitor and my speakers were making loud humming and clicking noises, I walked next door and asked if they had just started any particular equipment. Sure enough, they are running some skin treatment that uses lasers and radiofrequencies. They confirmed most sessions last about 30 to 45 minutes. Came here to Amazon, researched ferrite clipons - many different prices, sizes, suppliers, etc. This was the best mix of clips and price I found. Box arrived and I put on my speaker wires, monitors, just about everything. Now - NO HUMMING! No monitor shutting itself off. I do get slight patterns in my non- HDMI (just DVI) monitor hook up (I have 2 - one hdmi - one DVI) and that is how I know they are running the equipment. Then my coworker asked if I figured it out because his mouse stopped working and I put a clip on the wire to the IR sensor for his mouse and keyboard and it started working again. These clips definitely work and help. Not completely eliminated but now I can actually work and have speakers plugged in while the run the equipment. My situation is probably more unique but if you are having issues with radio interference these work. And I would say I probably have a high concentration of local frequency compared to most scenarios. (which is concerning for my own health...but I guess they don't make ferrite helmets!) The clips take a bit of massaging to get them to actually click and lock on. A slightly better design would resolved this but I did manage to get them all to stay on. This pack comes with various sizes to fit various wire sizes.

Great, easy-to-use variety set for when you want to cover a variety of cables and want peace of mind that you can find something that fits.

they are very good but still unsure of quality - wrapped the end of a USB cable and for good measure the aux as well at both end connections double wrapped a little, it cuts annoying screech hum well and I use noise supression to mix the louder buzz signal out now

I live right next to a busy street and have been experiencing TV signal(roof top antenna) interference whenever a certain car passes by(not every car, though). After extensive research, my best guess concluded the possible root cause was electromagnetic pulse (EMP) by spark plugs of car engine. So, I installed this magnetic every line(antenna, power). Wouldn't say it completely solved the problem but significantly improved it. Pretty happy with the purchase.

A while back I bought an S-video cable for my old Nintendo Wii, which I have hooked up to a CRT television. I began to notice some noise and after eliminating the TV, the Console, and the Video switcher as suspects, I began to suspect the cable itself was at fault. I had seen that someone else had used ferrites on theirs and ordered this package and after putting 5 or 6 along the cable the noise is completely gone. The selection of thicknesses was perfect for me, as the Wii cable is thicker coming from the console, but splits into thinner cables. Every part of the cable was snugly accounted for. After experimenting with the Wii, I turned my attention to my Japanese Famicom. Japanese TV signals actually use the same range of FM radio frequencies that American radios do, and I sometimes could hear the local station whenever I turned off my system, and sometimes atmospheric conditions woudl generally just make the signal a mess. I put 4 of these along the cord of the RF adapter that goes from the system itself to the gray box (I use a North American RF adapter from the NES to hook mine up) and not only did the Radio interference go away, but the picture was a little cleaner (though RF will never be purely clean, that's just how that format is). All in all, this is an excellent package and a great value! I plan on buying more.

IT WORKED PARTIALLY. IS THE POWER OF THESE FERRITE CLIPS WEAK? THE BIGGEST CULPRITS WERE MY GARBAGE DISPOSAL POWER CORD, MY REFRIGERATOR POWER CORD (PLUGGED INTO AN EMF FILTER!), AND MY TABLET CHARGING CABLE FOR SAMSUNG. I ADDED 2X - 4X MORE UNTIL THE PAIN DECREASED SIGNIFICANTLY. I USED THE REMAINDER ON ELECTRIC OR POWER CORDS ELSEWHERE LIKE MY MICROWAVE AND PENDULUM LIGHT FIXTURES. MY PAIN DECREASED SIGNIFICANTLY ONLY TO RESTART. IT WAS AS IF SOMEONE MADE ADJUSTMENTS BY ROTATING THE PAIN TO DIFFERENT LOCATIONS ON MY BODY AND BY INCREASING THE POWER. I WANTED TO RECOMMEND THIS PRODUCT TO MY FAMILY AND NEIGHBORS BUT I DON'T HAVE CONFIDENCE IN IT. NEXT, I ORDERED A FERRITE RING TO AVOID HAVING A RIDICULOUS NUMBER OF CLIPS ON MY TABLET CHARGER, AND ONE FOR MY ELECTRIC RANGE AT 1.25" WIDTH POWER CORD.

Surprisingly useful, and delivered in a timely manner

These are great! Snap them on and done. See my picture for exactly what was in the box, as I'm not sure if it matches the description but seemed pretty close. I've written the sizes on them in the pic if you look close. The 3mm are good for regular car wires, which I used on my headlight wires at the bulb, the larger ones are good for covered cables, as well as smaller wires if you want to try looping them thru a couple times or more. They snap on easily and with a small screwdriver they are easily removed, yet seem to be quite secure when attached. Would buy these again.

They worked as stated but they break if you squeeze them to get them to close and snap together. I had a couple break because it was hard to get them to latch properly.

Had a guitar amp where the spring reverb was picking up RF interface over the RCA input/ouput jacks. Put these on and got rid of the noise!

After installing LED work lights on my tractor the radio had a lot of parasite noise. These ferrites fixed it up!