Mopar 4874371AC Throttle Position Sensor by

I was concerned this was not going to be an OEM part after reading others reviews. I had bought a non OEM part from a local auto parts house and it did not work, in fact the jeep ran worse after installing their part. After receiving the part from Amazon it came in OEM packaging, installed the part and my jeep hasn't ran this good in years. Part from Amazon was a an upgraded part but fit perfectly.

My Cherokee has 246,000 miles and I’m gonna keep driving it so I figured it was time to update all of the sensors with high quality parts.The Jeeps performance is actually better now!

This item got my Jeeps idle back to normal.

Very upset about receiving this cheap part disguised as an OEM Mopar part! Package came half open with a sticker attempting to hide that it was open holding it together. (See pic) The pics The seller provided are pics of an actual Mopar sensor but what you get is a different story. If you look at the pictures I have provided there are a few dead giveaways;1. The Red O ring only goes around the throttle shaft and not inside with the 6 rectangular slots like the OEM Mopar.2. Bolt hole sleeves are Silver and not brass colored like the OEM Mopar.3. Bolts are silver with Red loctite rather than black with yellow loctite like the oem Mopar.4. Part # on part is screen printed instead of engraved like the oem Mopar.Hopefully this helped someone avoid being scammed by this Dishonest seller. If you’re dead set on getting this one at least save yourself money an get the $10.99 one cuz that’s what you’re getting anyway. (Unless a half open Mopar bag is worth $72 to you then be my guest) good luck !

My package never arrived. However, I ordered the same Mopar TPS elsewhere and if you get a genuine Mopar TPS it will save you trouble and hassle down the road because the generic ones either don't last or don't work properly from the get go. Mine was for a 2001 Jeep Wrangler. I thought I had something else going on after the 2 generic sensors didn't solve my problem, but then like magic the Mopar one did!

Purchased Jan 2021. I can say with confidence that the sensor I received was in fact a Mopar unit. No fitment or quality issues. Tested with an analog multi-meter prior to final installation and this sensor maintained a clean sweep through its range.

Bought many others got my wrangler TJ before purchasing this one been running right since been over a year

Tried the cheaper aftermarket, but still had engine light- This OEM part fixed it. The aftermarket part is only $30 and it is hard to bring yourself to purchase this $80 part, but in the end.....I shelled out more money because the aftermarket did not have the quality airtight fit needed.ADDITIONAL INFO 11-14-13If you need TPS, this is the one! In the end I had more engine light issues with codes pointing to up front bank O2 sensor, I changed those... still issues. FINALLY I found a thread that discussed issues with Ethanol causing problems with air/fuel mix. So now, not certain if it was ever my TPS, O2 sensor or muffler. I only know since doing all that and SeaFoam in my intake....after NOT use Ethanol fuel, 8 months later NO ENGINE LIGHT! My suggestion- Check Gas cap first ($8), avoid Ethanol fuel (Jeep Forums discuss this with 4.0), then try TPS, O2 ups (CA Jeep you have 4 O2 sensors, lower will not mess with air/fuel to set off light) Also.....when you change any of these things, a reset by disconnecting your battery overnight, never hurts. Let your computer adjust to the changes you have made or you may end up with a false/positive engine light.