KnightsbridgeCU9000 Curved Edge 13 A 2 Gang DP Switched Socket, White

The Knightsbridge CU8350 Curved Edge 1 Gang Blanking Plate is exactly what I needed. It has a nice slimline design. Whilst not flush with the wall it blends nicely against the wall and looks neat. The curved edges give it a modern touch, and the quality feels solid.Easy to install and does the job of covering an unused socket perfectly. If you’re looking for a simple, clean solution, this is a great choice!

Got value for money

The light stays on, bit confusing but can be good cause you can see the switch

Quality product that's easy to fit, it has standard bolt holes.I like the light that shines when in use.I would recommend.

Very good quality better than the ones I bought from a shop easy to fit and look good would purchase again

Great product easy to use and fit. Great value.

These plugs look smart, are easy to fit, and work well with the Smart Life app. Setup in the app is very easy, and they show as 2 sockets on one device that can be controlled individually or together and assigned different names. They take a little getting used to for manual use as the switches are sprung, and operate more like push buttons than rockers and always return to what would traditionally be an 'off' position. There is a green light that shows when a socket is turned on, but it seems this doesn't function until the switches have been paired so out of the box there is no way to visually tell if the switches are on or not which is not ideal.The first big issue we've found with them is that if there is a power outage they do not remember their state and will always be turned off after the power has returned. Once they reach a time where you have programmed them, that will do what you programmed. However, we were using one socket on our fridge freezer as the socket was out of reach, so wanted to remote control it when defrosting etc, and we wanted to monitor power use. We had not set any timers, as this use didn't require it. We get fairly regular power cuts here at the moment and were regularly finding the fridge freezer stayed turned off after the power came back. We've resolved this by setting a 'turn on' timer for every hour, but this means we have to disable the timers when we need to defrost or it will just turn itself back on again.The next problem is they have a maximum load protection. The description does say not to run high load appliances, such as hot tubs, for extended periods of time but it is hard to know what that translates to. We have one socket which has our washing machine and drier attached to it (each plugged directly into one of the double sockets, not through a splitter). Again, I wanted s smart socket as the sockets are out of reach, and because we wanted to monitor energy use. It works fine if we are running either the washing machine or dryer. However we cannot run both at the same time as both sockets turn off after a few seconds, every single time. This means we're going to have to switch this back to a traditional socket as this is clearly too high load.If these issues won't impact your use case then I do think these are good sockets. We have quite a lot of them, and in most situations they work really well. However, do be careful if you have appliances you need to stay on in all circumstances, such as a fridge freezer, or if you are looking to run high load appliances, and maybe look at alternatives.

Was missing screws and screw covers but needed it installing same day so didn't bother sending back just for that. Used some spare screw covers from my tool box. Good isolating transformer, quiet but there is a very slight hum when something is plugged in. Laminations on the core are bolted together so helps to reduce vibration. Has a shutter on the holes which allows only one side at a time to be used, and switches the unit on when a plug is inserted which some models don't have. Neon light comes on when a plug is inserted. I installed it inside a bathroom cabinet for charging toothbrush and using a water flosser. It will require a 47mm deep back box as the transformer is quite bulky. Powerful enough to run the water flosser but don't expect to run anything that takes more than 20 watts, so forget hair dryers or heated tongs.